Draper quarter and half inch Sq. Dr. Metric Socket Set 100 Piece 55318
- 100 Piece Set
- Chrome Vanadium Steel
- General purpose/Home use
- Interchangeable
- Hard Carry Case
- Comprehensive Tool Kit
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Draper 1/4" And 1/2" Sq. Dr. Metric Tool Kit 100 Piece TKD100M
Comprehensive socket set for use around the home. Each socket is made from chrome vanadium steel, that’s hardened and tempered with a matt finish. Each socket has a knurled ring for extra grip. Supplied with a 72 tooth reversible soft grip ratchet and a host of accessories. Packed in a tough plastic storage case.
Contents:
- 1/2" Square drive 72 tooth ratchet
- 1/2" Square drive extension bars - 125, 250mm
- 1/2" Square drive Three-way adaptor
- 1/2" Square drive x 8mm hex adaptor
- 1/2" Square drive deep sockets 14, 15, 17, 19mm
- 1/2" Square drive spark plug sockets 16, 21mm
- 1/2" Square drive universal joint
- 1/2" Square drive sockets - 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm
- 1/4" Square drive 72 tooth ratchet
- 1/4" Square drive sockets - 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm
- 1/4" Square drive deep sockets - 6, 7, 8, 9, 10, 11, 12, 13mm
- 1/4" Square drive extension bars - 50, 100mm
- 1/4" Square drive flexible extension bar - 150mm
- 1/4" Square drive sliding T Bar
- 1/4" Square drive spinner handle
- 1/4" Square drive spinner handle
- 1/4" Square drive universal joint
- 1/4" Square drive adaptor
- 1/4" socket screwdriver bits: Plain Slot - 4, 5.5, 7mm, Cross Slot 1, 2, PZ Type 1, 2, TX Star 8, 10, 15, 20, 25, 30, Hex 3, 4, 5, 6
- 5/16" x 30mm Screwdriver bits: Plain Slot - 7, 8, 10, 12mm, Cross Slot 3, 4, PZ Type 3, 4, TX Star 30, 35, 40, 45, 50, 55, 60, 70 Hex 7, 8, 10, 12, 14
- Hex keys 1.5, 2, 2.5mm
About Draper
The history of Draper Tools starts in 1919, when Bert Draper ran a business of trading government surplus and tools in Kingston Upon Thames. The company was known initially as B. Draper & Son Limited, and operated as a wholesaler for brands such as King Dick, as well as its own B.D.S. brand.
The company moved to the Chandler's Ford site in 1963, under the management of Bert's son, Norman Draper. The company formed international partnerships with manufacturers such as Germany's Elora and Knipex.
Draper tools are a well established tool brand offering outstanding quality at the price, aimed at the professional and DIY markets.
| Key Features | 100 Piece Set, Chrome Vanadium Steel, General purpose/Home use, Interchangeable, Hard Carry Case, Comprehensive Tool Kit |
|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) |
| Manufacturer | Draper Tools |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA