Chauvin Arnoux CA6505 Digital Megohmmeter P01139714
- Measures up to 10 TΩ
- Backlit LCD Display
- 40 V to 5
- 100 V in 10 or 100 V increments
- DAR
- PI
- DD Calculations
- 0.000 nA to 3
- 000 A
- 0.001 to 49.99 F
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Chauvin Arnoux CA6505 Digital Megohmmeter
The Chauvin Arnoux CA6505 is an insulation resistance measurement tool that can be used to measure resistance levels from 10kΩ up to 10TΩ. It is ideally suited for insulation measurements on cables, motors, generators, transformers and more.
The CA6505 is built into its own protective carrying case, making porting between tests quick and easy. The case also protects the tester from damage at all times, ensuring that it can be used in dangerous environments such as industrial areas. Inside the case the CA6505 features a large-size LCD screen which clearly relays testing values.
The CA6505 Comes Supplied With:
- Chauvin Arnoux CA6505 Megohmmeter
- Carrying Bag
- 2 x 2m Measurement Leads (with HV Plug at Each End)
- 1 x Guarded Safety Lead (2m with HV Plug)
- 3 x Crocodile Clips
- Mains Power Cable (1.80m Long)
Key Features:
- Fixed 500/1,000/2,500/5,000 V DC test voltage or programmable from 40 V to 5,100 V DC
- Measurement range: 10 kΩ to 10 TΩ
- Programmable test duration
- Calculation of DAR & PI quality ratios
- Measurement of voltage, capacitance and leakage current
- LCD screen with bargraph
- Power supply by NiMh rechargeable battery
- Compliant with IEC 61557
- IP53 protection
- IEC 61010 1,000 V CAT III safety
- Dimensions: 270 x 250 x 180 mm / 4.3 kg
Main Applications
• Insulation measurement on cables, motors, generators, transformer
2 levels of diagnostics: – "Go/No go" measurement
-Qualitative measurement for preventive maintenance:
- Testing with programmed duration
- Quality ratios: polarization index (PI) & dielectric absorption ratio (DAR)
- Insulation testing on heterogeneous or multi-layer cables (dielectric discharge index)
- Step voltage
• Locking of test voltages: ideal when entrusting the instrument to less experienced users
• Measurement voltage selectable from 40 to 5,100 V to deal with all types of measurement situations
"Theoretcal" Reminder
Reduced insulation may be due to slow, gradual deterioration over a long period of time, but also due to sudden damage. The effects of humidity, dirt, corrosion, penetration by chemicals and even vibrations can all cause this sort of deterioration. Its effects are easy to document using the quality ratios (PI-DAR-DD) available on the whole range of 5 Kv insulation testers. Comparison of the insulation values over time provides crucial information for preventive maintenance of machines.
This preventive maintenance is essential at 2 levels:
1. Safety: minimizing the risk of shortcircuits
2. Cost: avoiding the failure of important equipment leading to high costs in terms of production down - time, production losses and repairs.
ISSWWW and Chauvin Arnoux
The Chauvin Arnoux Group of companies, incorporating the Metrix and Multimetrix brands are synonymous with design and production of the finest quality products for the electrical testing industry, covering a diverse sector of the market for over 100 years. From their awarded Digiflex current sensors, universal testers, multimeters, network and power analysers, right up to laboratory instrumentation and beyond.
ISSWWW and Chauvin Arnoux have enjoyed a close working partnership for many years and we supply many of their products to trade and industry the world over.
| Key Features | Measures up to 10 TΩ , Backlit LCD Display, 40 V to 5,100 V in 10 or 100 V increments, DAR, PI, DD Calculations, 0.000 nA to 3,000 A, 0.001 to 49.99 F | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | Chauvin Arnoux | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Short Description |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA