Metrel MI 3360M Medical OmegaPAT XA PAT Tester

Name: Metrel MI 3360M Medical OmegaPAT XA PAT Tester
Brand: Metrel
SKU: METMI3360MED
Price: 2158.8 GBP
Availability: InStock

£2,158.80 £1,799.00

SKU

METMI3360MED

The Metrel OmegaPAT XA brings 4 models of the instrument, intended for professional use in the most demanding applications.

Price Banner

Important Calibration Information

This instrument comes with a *manufacturers calibration certificate.
Please see *below.

1d and QR Barcode Reading
4.3" Colour TFT Touch Screen
Create Instrument Testing Groups
Hard-wired Device Testing
Medical Autotest Sequences
Professional Industrial Level Instrument
Bluetooth
USB Support

Information on the calibration of newly purchased equipment and what it means to you.

Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

Personalised traceable calibration certificate from isswww

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.

Skip to the end of the images gallery

Metrel MI 3360 Medical OmegaPAT XA PAT Tester

Skip to the beginning of the images gallery

Description

Metrel MI 3360 Medical OmegaPAT XA PAT Tester

With features aimed specifically at the medical and surgical fields.

The new series of OmegaPAT XA brings 4 models of the instrument, intended for professional use in the most demanding applications. All of them support user accounts, which means that one device can be used by several electricians. Model versions cover the following fields of testing: portable appliances, welding equipment, medical devices and professional testing of PRCD devices.

All instruments have an advanced built-in user interface that enables the execution of pre-defined and user-created AUTOSEQUENCE®s. Large memory capacity (8 GB microSD card) enables the user long term saving and archiving of data. All the instruments are specially designed for long-term testing, since their memory structure enables simple searching through the archive of devices and quick re-execution of (periodic) tests.

Great emphasis was put on support for peripheral devices such as printers and barcode or QR code scanners and RFID readers (in Bluetooth and wired versions). On top of that, all instrument versions are supported by our Metrel ES Manager PC software.

*Important Calibration Information:

This instrument comes complete with the manufacturers calibration certificate. Please be aware that these certificates are generic and may also be time lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply. The calibration on this model is subject to various criteria over and above a regular calibration, if you require calibration on this machine then please request a quotation, we will call you with some details.

Metrel MI 3360 (Medical Set) Comes Supplied With:

Instrument MI 3360 (25A, M, F) OmegaGT XA
Bag for accessories
Smartball pen with touch screen function
Flash test probe (MI 3360 F only)
Crocodile clip, red (MI 3360 F only)
Crocodile clip, black
Test lead, black
Test tip, black
IEC test cable, 2 m
Mains cable
USB cable
Calibration certificate
Short form instruction manual
CD with instruction manual (full version) and PC SW Metrel ES Manager

Measuring Functions:

Please refer to the table below for model specific measuring functions.

Visual inspections
Fuse test
Continuity / Protective earth resistance 200mA;
Continuity / Protective earth resistance 25A
Insulation Resistance (Riso, Riso-S);
Sub-Leakage Current, Substitute Leakage Current - S;
Differential Leakage current;
PE leakage current;
Touch leakage current;
Insulation resistance, IEC/EN 62353;
Touch leakage current, IEC/EN 62353;
Equipment leakage (direct, differential, alternative) IEC/EN 62353;
Applied part leakage (direct, alternative), IEC/EN 62353;
Insulation resistance, (optional A 1422) IEC/EN 60974-4;
Welding circuit leakage, (optional A 1422) IEC/EN 60974-4;
Primary leakage, (optional A 1422) IEC/EN 60974-4;
No-load voltage, (optional A 1422) IEC/EN 60974-4;
Power (P, S, Q, PF, THDu, THDi, CosØ, I, U,);
PRCD test, (2 pole, 3 pole, K/ Di (varistor), S (3-pole));
PRCD PE probe test, PRCD open conductor test, PE conductor (PRCD) test;
RCD test, (type A, AC, B, B+, F);
Flash test, (1500V, 3000V);
Polarity / Active polarity test;
Clamp current (with optional A 1283).

Advanced Medical Functions (This Model Only):

Equipment Leakage Current (Alt., Dir., Diff.)
Applied Part Leakage Current (Alt., Dir., Diff.)
Touch Leakage Current (Medical)
AUTOSEQUENCE Medical
Medical Mode

Key Features:

Touch screen: high resolution colour touch screen, 4.3” TFT.
Double manipulation: keyboard and touch screen enable the user to control the instrument in any manner they like.
Pre-defined AUTOSEQUENCE®s: enable the user simple and quick execution of test sequence for the chosen device.
Read the code and test: QR and barcode system of labelling in combination with AUTOSEQUENCE®s enables the user quick and simple testing of electrical devices.
Testing groups: the instruments have built-in filters in accordance with their area of application, which enables the user simple choice of needed test sequences.
Support for PRCD testing: support for all types of PRCDs, including 2-pole, 3-pole, K/Di (varistor), S (3 pole) and testing with the PE probe.
Support for RCD testing: all instruments support testing of A, AC, B, B+ and F RCDs.
Fuse testing: the instrument has a special, integrated testing module for quick testing of all types of fuses.
Hard-wired devices: the instruments have integrated additional test terminals that enable the user simple testing of hard-wired devices.
High-voltage testing (only MI 3360 F): the instrument enables insulation resistance measurement that has to be performed after repairs or maintenance of electrical devices.
Testing of medical devices (only MI 3360 M): the instrument enables testing of medical devices in accordance with IEC/EN 62353.
Testing of welding equipment (only in combination with A 1422): all models of OmegaPAT XA support testing of welding equipment in accordance with IEC/EN 60974-4.
Large memory: support for microSD memory cards, 8 GB card already integrated in the instrument, although that can be expanded to 32 GB.
PC SW Metrel ES Manager: enables creation of test structures, user-defined AUTOSEQUENCE®s, professional test reports and data transfer for archiving.
aMESM Android SW: enables QR code scanning, and uploading of pre-prepared user-defined AUTOSEQUENCE®s.

Applications:

Industrial Systems

Electrical Equipment / Appliances
Maintenance / Troubleshooting
3-phase system testing

Buildings Facility Management

Portable Appliances / Fixed Wiring
Portable Appliances / Multiple Point testing
Risk Assessments

Special Installations / Locations

Construction Sites
Medical Sites / Surgery Rooms
Ambulance Vehicles / LV Emergency Units
Welding equipment testing
Service / Repair / Rental Offices

Standards Applied:

Code of practice

AS / NZ 3760

AS / NZ 3017

VDE 0701 - 0702

IEC/EN 60974 series
IEC/EN 60974-4 / VDE 0544-4

IEC/EN 61557 series
IEC/EN 61557 relevant parts

IEC/EN 62353 / VDE 0751-1

Which Metrel MI 3360 PAT is right for me?

Metrel MI 3360 Selection Chart
Measuring function	MI 3360	MI 3360 25A	MI 3360 M	MI 3360 F
Visual inspections	•	•	•	•
Fuse test	•	•	•	•
Continuity // Protective earth resistance 200mA	•	•	•	•
Continuity // Protective earth resistance 10A, 25A		•	•	•
Insulation Resistance (Riso, Riso-S),	•	•	•	•
Substitute Leakage Current, Substitute Leakage Current - S	•	•	•	•
Differential Leakage current	•	•	•	•
PE leakage current	•	•	•	•
Touch leakage current	•	•	•	•
Polarity / Active polarity test	•	•	•	•
Power (P, S, Q, PF, THDu, THDi, CosØ, I, U)	•	•	•	•
P-RCD, (2 pole, 3 pole, K/ Di (varistor), S (3-pole))	•	•	•	•
PRCD PE probe test, open conductor test, PE conductor test	•	•	•	•
RCD test, (type A, AC, B, B+, F)	•	•	•	•
Flash test, (1500V, 3000V)				•
Insulation resistance, IEC/EN 62353			•
Touch leakage current, IEC/EN 62353			•
Equipment leakage (direct, differential, alternative) IEC/EN 62353			•
Applied part leakage (direct, alternative), IEC/EN 62353			•
Insulation resistance, (optional A 1422) IEC/EN 60974-4	•	•	•	•
Welding circuit leakage, (optional A 1422) IEC/EN 60974-4	•	•	•	•
Primary leakage, (optional A 1422) IEC/EN 60974-4	•	•	•	•
No-load voltage, (optional A 1422) IEC/EN 60974-4	•	•	•	•
Clamp current (with optional A 1283)	•	•	•	•

About Metrel

Metrel was established in 1957 as a factory for the production of electrical measuring instruments and components for the domestic market and grew from there to become one of world’s leading manufacturers of measuring and testing equipment. They are one of the few companies in the industry that develops and manufactures products at a single location, starting with design and ending with final assembly, quality control and calibration.

Features & Specification

More Information

Key Features

1d and QR Barcode Reading, 4.3" Colour TFT Touch Screen, Create Instrument Testing Groups, Hard-wired Device Testing, Medical Autotest Sequences, Professional Industrial Level Instrument, Bluetooth, USB Support

Product Stock Status

Next Day Delivery (subject to availability)

Manufacturer

Metrel

Short Description

Metrel MI 3360x Specification
Continuity / Protective Earth Resistance
Continuity
Ranges	0.00 Ω … 19.99 Ω / 20.0 Ω … 99.9 Ω / 100.0 Ω … 199.9 Ω / 200 Ω … 999 Ω
Resolution	0.01 Ω / 0.1 Ω / 0.1 Ω / 1 Ω \
Accuracy	±(2 % of reading + 2 D) / ± 3 % of reading / ± 5 % of reading / indicative
Operating range (acc. to EN 61557-4)	0.08 Ω … 199.9 Ω
Test currents	0.2 A,10 A, 25 A
Current source (at nominal mains voltage, use of standard accessories)	> 0.2 A at R < 2 Ω
	> 10 A at R < 0.1 Ω at 230 V
	> 25 A into short circuit at 230 V
Open circuit voltage	< 9 V a.c.
Test Terminals
Continuity
R (200 mA)	P/S – PE, Socket PE; Socket PE – IEC PE
R (10 A, 25 A)	P/S – Socket PE; Socket PE – IEC PE
Protective Earth Resistance
R (200 mA)	P/AP – PE, Socket PE
R (10 A, 25 A)	P/AP – Socket PE
Insulation Resistance (Riso, Riso-S)
Insulation resistance, Insulation resistance –S (250 V, 500 V)
Range	0.00 MΩ … 19.99 MΩ / 20.0 MΩ … 99.9 MΩ / 100.0 MΩ … 199.9 MΩ
Resolution	0.01 MΩ / 0.1 MΩ / 0.1 MΩ
Accuracy	±(3 % of reading + 2 D) / ± 5 % of reading /± 10 % of reading
Output voltage (Um)
Range	0 V … 600 V
Resolution	1V
Accuracy	±(3 % of reading + 2 D)
Operating range (acc. to EN 61557-2)	0.08 MΩ … 199.9 (999) MΩ
Nominal voltages Un	250 V, 500 V (- 0 %, + 10 %)
Short circuit current	max. 2.0 mA
Test terminals	Riso LN, Socket LN – PE, Socket PE, P/S
Test terminals	Riso-S LN, Socket LN – P/S
Sub-Leakage Current, Substitute Leakage Current - S (Isub, Isub-S)
Range	0.00 mA … 1.99 mA / 2.00 mA … 19.99 mA
Resolution	0.01mA / 0.01mA
Accuracy	±(3 % of reading + 3 D) / ±(5 % of reading)
Operating range (acc. to EN 61557-16)	0.02 mA … 19.99 mA
Open circuit voltage	230 V a.c., 110 V a.c.
Current calculated to mains supply voltage (110 V or 230 V) is displayed.
Test Terminals	Isub LN, Socket LN – PE, Socket PE, P/S
Test Terminals	Isub-S LN, Socket LN – P/S
Differential leakage current (Idiff)
Differential leakage current
Range	0.000 mA … 1.999 mA / 2.00 mA … 19.99 mA
Resolution	1 µA / 0.01 mA
Accuracy	±(3 % of reading + 3 D) / ±(5 % of reading)
Power (active) (P)
Range	0 W … 999 W / 1.00 kW … 3.70 kW
Resolution	1W / 10W
Accuracy	±(5 % of reading + 5 D) / ±5 % of reading
Operating range (acc. to EN 61557-16)	0.010 mA … 19.99 mA
Influence of load current	< 0.02 mA/A
Test terminals	Idiff Socket L,N – Socket PE, P/S
Test terminals	P Socket L – Socket N
PE leakage current (Ipe)
PE leakage current
Range	0.000 mA … 1.999 mA / 2.00 mA … 19.99 mA
Resolution	1µA / 0.01mA
Accuracy	±(3 % of reading + 3 D) / ±(5 % of reading)
Power (active) (P)
Range	0 W … 999 W / 1.00 kW … 3.70 kW
Resolution	1W / 10W
Accuracy	±(5 % of reading + 5 D) / ±5 % of reading
Operating range (acc. to EN 61557-16)	0.010 mA … 19.99 mA
Test terminals	Ipe Socket L,N – Socket PE
Test terminals	P Socket L – Socket N
Touch leakage current (Ipe)
Touch leakage current
Range	0.000 mA … 1.999 mA / 2.00 mA … 19.99 mA
Resolution	1 µA / 0.01mA
Accuracy	±(3 % of reading + 3 D) / ±(5 % of reading)
Power (active) (P)
Range	0 W … 999 W / 1.00 kW … 3.70 kW
Resolution	1W / 10W
Accuracy	±(5 % of reading + 5 D) / ±5 % of reading
Operating range (acc. to EN 61557-16)	0.010 mA … 19.99 mA
Test terminals	Itou: Socket L,N – P/S
Test terminals	P: Socket L – Socket N
Power
Power (active) (P)
Range	0 W … 999 W / 1.00 kW … 3.70 kW
Resolution	1W / 10W
Accuracy	±(5 % of reading + 5 D) / ±5 % of reading
Power (apparent) (S)
Range	0 VA … 999 VA / 1.00 kVA … 3.70 kVA
Resolution	1 VA / 10VA
Accuracy	±(5 % of reading + 5 D) / ±5 % of reading
Power (reactive) (Q)
Range	±(0 VAr … 999) VAr / ±(1.00 kVAr … 3.70) kVAr
Resolution	1 VAr / 10 VAr
Accuracy	±(5 % of reading + 5 D) / ±5 % of reading
Power factor (PF)
Range	0.00i … 1.00i / 0.00c … 1.00c
Resolution	0.01
Accuracy	±(5 % of reading + 5 D)
Total Harmonic Distortion (voltage) (THDU)
Range	0.0 % … 99.9 %
Resolution	0.1 %
Accuracy	±(5 % of reading + 5 D)
Total Harmonic Distortion (current) (THDI)
Range	0.00 A … 16.00 A
Resolution	0.01 A
Accuracy	±(3 % of reading + 5 D)
Cosinus Φ (Cos Φ)
Range	0.00i … 1.00i / 0.00c … 1.00c
Resolution	0.01
Accuracy	±(5 % of reading + 5 D)
Current (I)
Range	0.00 A … 16.00 A
Resolution	0.01 A
Accuracy	±(3 % of reading + 5 D)
Voltage (U)
Range	0.0 V … 199.9 V / 200 V … 264 V
Resolution	0.1V / 1V
Accuracy	±(3 % of reading + 10 D) / ±3 % of reading
Test terminals
P,S,Q,PF,THDU,THDI, Cos Φ, I, U	Socket L – Socket N
Leaks & Power
Power (active) (P)
Range	0 W … 999 W / 1.00 kW … 3.70 kW
Resolution	1W / 10W
Accuracy	±(5 % of reading + 5 D) / ±5 % of reading
Touch leakage current: (Itou)
Range	0.000 mA … 1.999 mA / 2.00 mA … 19.99 mA
Resolution	1 µA / 0.01 mA
Accuracy	±(3 % of reading + 3 D) / ±(5 % of reading)
Operating range (acc. to EN 61557-16)	0.010 mA … 19.99 mA
Differential leakage current (Idiff)
Range	0.000 mA … 1.999 mA / 2.00 mA … 19.99 mA
Resolution	1 µA / 0.01 mA
Accuracy	±(3 % of reading + 3 D) / ±(5 % of reading)
Operating range (acc. to EN 61557-16)	0.010 mA … 19.99 mA
Influence of load current	< 0.02 mA/A
Power (apparent) (S)
Range	0 VA … 999 VA / 1.00 kVA … 3.70 kVA
Resolution	1 VA / 10VA
Accuracy	±(5 % of reading + 5 D) / ±5 % of reading
Power (reactive) (Q)
Range	±(0 VAr … 999) VAr / ±(1.00 kVAr … 3.70) kVAr
Resolution	1 VAr / 10 VAr
Accuracy	±(5 % of reading + 5 D) / ±5 % of reading
Power factor (PF)
Range	0.00i … 1.00i / 0.00c … 1.00c
Resolution	0.01
Accuracy	±(5 % of reading + 5 D)
Total Harmonic Distortion (voltage) (THDU)
Range	0.0 % … 99.9 %
Resolution	0.1 %
Accuracy	±(5 % of reading + 5 D)
Total Harmonic Distortion (current) (THDI)
Range	0.00 A … 16.00 A
Resolution	0.01 A
Accuracy	±(3 % of reading + 5 D)
Cosinus Φ (Cos Φ)
Range	0.00i … 1.00i / 0.00c … 1.00c
Resolution	0.01
Accuracy	±(5 % of reading + 5 D)
Current (I)
Range	0.00 A … 16.00 A
Resolution	0.01 A
Accuracy	±(3 % of reading + 5 D)
Voltage (U)
Range	0.0 V … 199.9 V / 200 V … 264 V
Resolution	0.1V / 1V
Accuracy	±(3 % of reading + 10 D) / ±3 % of reading
Test terminals
P,S,Q,PF,THDU,THDI, Cos Φ, I, U	Socket L – Socket N
Idiff	Socket L,N – Socket PE, P/S
Itou	Socket L,N – P/S
PRCD test
Trip-out time (tΔN)
Range	0 ms … 300 ms (999 ms*) (½xI∆N) / 0 ms … 300 ms (I∆N) / 0 ms … 40 ms (5xI∆N)
Resolution	1ms / 1ms / 1ms
Accuracy	±3ms / ±3ms / ±3ms
*According to standard AS/NZS 3017
Trip out-current (IΔ)
Range	0.2xI∆N … 2.2xI∆N
Resolution	0.05xI∆N
Accuracy	±0.1xI∆N
Test current type	sine-wave (AC), pulsed (A,F), smooth DC (B,B+)
Test currents (IΔN)	10 mA, 15 mA, 30 mA;.................100 mA and 300 mA with A1322, A1422
Test current size (PRCD standard is AS/NZS 3017)	±5%
Test current size (general)	-0/+10%
Test terminals	tΔN, IΔ Socket – IEC
RCD Test
Trip-out time (tΔN)
Range	0 ms … 300 ms (999 ms*) (½xI∆N) / 0 ms … 300 ms (I∆N) / 0 ms … 40 ms (5xI∆N)
Resolution	1ms / 1ms / 1ms
Accuracy	±3ms / ±3ms / ±3ms
*According to standard AS/NZS 3017
Trip out-current (IΔ)
Range	0.2xI∆N … 2.2xI∆N
Resolution	0.05xI∆N
Accuracy	±0.1xI∆N
Contact voltage (Uc)
Range	0.0 V … 19.9 V / 20.0 V … 99.9 V
Resolution	0.1V / 0.1V
Accuracy	(-0 % / +15 %) of reading ± 10 D / 0.1 V (-0 % / +15 %) of reading
Test current type	sine-wave (AC), pulsed (A,F), smooth DC (B,B+)
Test currents (IΔN)	10 mA, 15 mA, 30 mA
Test current size (RCD standard is AS/NZS AS/NZS)	5%
Test current size (EN 61008/EN 61009)	-0/+10%
Test terminals	tΔN, IΔ Mains Socket
PE conductor (PRCD)
PE conductor (Type = 2 pole, 3 pole, S(3 pole)) (R)
Range	0.00 Ω … 19.99 Ω / 20.0 Ω … 99.9 Ω / 100.0 Ω … 199.9 Ω / 200 Ω … 999 Ω
Resolution	0.01 Ω / 0.1 Ω / 0.1 Ω / 1 Ω
Accuracy	±(2 % of reading + 2 D) / ± 3 % of reading / ± 5 % of reading / indicative
Operating range (acc. to EN 61557-4)	0.08 Ω … 199.9 Ω
Current source (at nominal mains voltage, use of standard accessories)	> 0.2 A at R < 2 Ω
Open circuit voltage	< 9 V a.c.
Test terminals	R Socket PE – IEC PE
PE conductor (Type = K/ Di (varistor))
Test principle: A voltage is applied between PE connections of the PRCD-K. There is a ‘PASS’ if PRCD trips.
Open circuit voltage	24 V
Output resistance	220 Ω ± 10 % (IΔN = 30 mA), 620 Ω ± 10 % ((IΔN = 10 mA)
Test terminals	Result: Socket – IEC
Open conductor (PRCD)
Test principle: Mains voltage is applied to the mains test socket. Disconnection of the L, N and PE connections is performed inside the instrument. There is a ‘PASS’ if the PRCD trips.
Test terminals	L open, N open, PE open Socket – IEC
PRCD PE probe test
Test principle: Mains voltage is applied to the mains test socket. A safe voltage sufficiently high to activate the protection circuit in the PRCD is applied to the P/S terminal.
Test terminals	Result (manual): Socket, P/S
Test terminals	Result (auto): Socket – IEC, P/S
Polarity
Test voltage (normal)	< 50 V
Test voltage (active)	mains voltage
Power consumption of tested device during the active test	< 25 VA
Test terminals	Result (normal, active) Socket – IEC
Clamp current (I, Idiff, Ipe)
True RMS current using 1000:1 current clamp
Range	0.10 mA … 9.99 mA / 10.0 mA … 99.9 mA / 100 mA … 999 mA / 1.00 A … 9.99 A / 10.0 A … 24.9 A
Resolution	0.01 mA / 0.1 mA / 1 mA / 0.01 A / 0.1 A
Accuracy	±(5 % of reading + 10 digits) / ±(5 % of reading + 5 digits) / ±(5 % of reading + 5 digits) / ±(5 % of reading + 5 digits) / ±(5 % of reading + 5 digits)
Notes	Accuracy of current transformer is not considered.
Notes	Frequency range of current clamp is not considered.
Test terminals	I, Idiff, Ipe: CLAMPS terminals
Insulation resistance Riso (welding equipment)
Riso
Range	0.00 MΩ … 19.99 MΩ / 20.0 MΩ … 99.9 MΩ / 100.0 MΩ … 199.9 MΩ
Resolution	0.01 MΩ / 0.1 MΩ / 0.1 MΩ
Accuracy	±(3 % of reading + 2 D) / ±5 % of reading / ±10 % of reading
Output voltage (Um)
Range	0 V … 600 V
Resolution	1 V
Accuracy	±(3 % of reading + 2 D)
Operating range (acc. to EN 61557-2)	0.08 MΩ … 199.9 (999) MΩ
Nominal voltages Un	500 V (- 0 %, + 10 %)
Short circuit current	max. 2.0 mA
Test terminals
Riso LN-W: A 1422	Socket L1 L2 L3 N (16A-5p, 32A-5p or 16A-3p) – W1 W2
Riso W-PE	A 1422: Socket PE (16A-5p, 32A-5p or 16A-3p) – W1 W2
Riso LN-PE	A 1422: Socket L1 L2 L3 N (16A-5p, 32A-5p or 16A-3p) – Socket PE (16A-5p, 32A-5p or 16A-3p)
Riso LN (Class II) - P	A 1422: Socket L1 L2 L3 N (16A-5p, 32A-5p or 16A-3p) – MI 3360: P/S
General Specifications
Mains supply
Supply voltage, frequency	110 V / 230 V AC, 50 Hz / 60 Hz
Supply voltage tolerance	10 %
Max. power consumption	300 VA (without load on test socket)
Max. load	10 A continuous, 16 A short duration, 1.5 kW motor
Mains supply overvoltage category	CAT II / 300V
Altitude	≤ 2000 m
Measuring categories
Instrument	Cat II / 300 V
Test socket	Cat II / 300 V
Plug test cable	Cat II / 300 V
Altitude	≤ 2000 m
Protection classifications
Power supply	Class I, mains supply, Class II, only battery supply
Pollution degree	2
Degree of protection	IP40
Degree of protection	IP20 (mains test socket)
Case	Shock proof plastic / portable
Display	Colour TFT display, 4.3 inch, 480 x 272 pixels
Touch screen	Capacitive
Communication
Memory	depends on microSD card size
RS232 interfaces	2
USB 2.0	Standard USB Type B
Bluetooth	Class 2
Dimensions (w×h×d)	31 cm × 13 cm × 25 cm
Weight	6.1 kg
Reference conditions
Reference temperature range	15 ˚C … 35 ˚C
Reference humidity range	35 % … 65 % RH
Operation Conditions
Working temperature range	0 ˚C … +40 ˚C
Maximum relative humidity	85 % RH (0 ˚C … 40 ˚C), non-condensing
Storage Conditions
Temperature range	-10 ˚C … +60 ˚C
Maximum relative humidity	90 % RH (-10 ˚C … +40 ˚C)
Maximum relative humidity	80 % RH (40 ˚C … 60 ˚C)
Notes	Accuracies apply for 1 year in reference conditions. Temperature coefficient outside these limits is 0.2 % of measured value per ˚C plus 1 digit, otherwise noted.
Fuses	2 x T 16 A / 250 V, 32 mm  6.3 mm / 1500 A

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT	£4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm	£7.75
Saturday ANYTIME Delivery - Order by 2:00pm	£9.95

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA