Draper Automotive Electricians Tool Kit BLUEEK 03564
- Storage Box Included
- Electricians Kit
- 188 Piece Set
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Draper Automotive Electricians Tool Kit BLUEEK 03564
The Draper Automotive Electricans Kit Includes:
26" Tool Chest (5 Drawer) TC5D 14604
5 drawer tool chest manufactured from sheet steel with a powder coated finish and aluminium effect trim. Drawers are fitted with ball bearing runners for smoother operation and a protective foam liner. Each tool chest is fitted with heavy-duty carry handles and a secure integral locking system supplied with two keys. Carton packed.
Drawer configuration:
- 4 drawers: 570 x 273 x 48mm
- 1 drawer: 570 x 274 x 74.5mm
6-24V DC Heavy Duty Automotive Circuit Tester 1175
Expert Quality, circuit tester with 1.5M of heavy duty cable and earth (crocodile) clip. Insulated contact point to prevent accidental shorting. Testing range 6-24V DC. Display packed.
Warning: For testing DC circuits on vehicles within the voltage range only. Not suitable for testing mains supply AC circuits.
Automotive Digtal Multimeter DM300 41821
Auto and manual ranging capable of voltage, current, resistance, diode and continuity testing. Fitted with a backlit LCD screen, DWELL, Tach, MAX, auto power off, continuity buzzer and data hold features. Supplied with test leads, case and 2 x AAA batteries.
Expert Rachet Crimping Tool and Terminal Kit
Expert Quality, carbon steel with hardened and tempered jaws. Continuous crimping at preset tension ensures accurate crimp. Chemically blacked finish with PVC grips. Suitable for crimping insulated terminals as follows:
- red channel: 0.5-1.00mm²
- blue channel: 1.5-2.5mm²
- yellow channel: 4.0-6.0mm².
Supplied with 590 (approx.) mixed pre-insulated terminals in a steel storage case with insert. Display packed.
Precision Plier Set (5 Piece) IT-EVA3 63215
General duty precision pliers manufactured from carbon steel correctly hardened and tempered with induction hardened cutting edges. Fitted with soft grip handles for added user comfort. Supplied complete in a two tone 1/4 drawer EVA insert tray made from closed cell foam. Suitable to be used in Draper and Draper Expert tool chests and other manufacturers similar tool chests.
Contents:
115mm Flat Nose Pliers
125mm Long Nose Pliers
125mm Bent Nose Pliers
110mm Side Cutters
100mm End Cutters
VDE Approved Fully Insulated Plier Set (4 Piece) IT-EVA4 63216
Expert Quality, VDE pliers manufactured from drop forged chrome vanadium steel, which is correctly hardened and tempered with additionally induction hardened cutting edges with lacquered finish. Each plier has been tested to 10,000V AC or 1500V DC live line working. Fitted with fully insulated soft grip handles. Supplied complete in a two tone 1/2 drawer EVA insert tray made from closed cell foam. Suitable to be used in Draper and Draper Expert tool chests and other manufacturers similar tool chests.
Contents:
150mm wire stripping pliers
160mm side cutters
180mm combination pliers
200mm long nose plier
VDE Screwdriver Set (11 Piece) IT-EVA13 63379
Expert Quality, VDE screwdriver set individually tested to 10,000V AC or 1500V DC live line working. The screwdriver blades are manufactured from chrome vanadium steel, which is hardened and tempered with black finish. Fully insulated ergonomic soft grip handles with deep set blade sheath for total safety. Supplied complete in a two tone 1/2 drawer EVA insert tray made from closed cell foam. Suitable to be used in Draper and Draper Expert tool chests and other manufacturers similar tool chests.
Contents:
Plain Slot 2.5 x 75, 3 x 100, 4 x 125, 5.5 x 125, 6.5 x 150
Cross Slot No. 0, No. 1, No. 2,
PZ Type No. 0, No. 1, No. 2
Extra Long Precision Screwdriver Set (8 Piece) IT-EVA14 63399
Extra long precision screwdrivers, manufactured from chrome vanadium steel, which is correctly hardened and tempered fitted with soft grip handles for enhanced user comfort. Supplied complete in a two tone 1/4 drawer EVA insert tray made from closed cell foam. Suitable to be used in Draper and Draper Expert tool chests and other manufacturers similar tool chests.
Contents:
Plain Slot Screwdrivers 2.5 x 75mm, 3 x 100mm and 4 x 150mm
Cross Slot Screwdrivers No. 0 x 150mm, No. 00 x 100mm and No. 000 x 75mm
Draper TX-STAR® Screwdrivers T8 x 75mm, T9 x 75mm
Screwdriver Insert Bit Set (40 Piece) IT-EVA32 63515
Screwdriver bits manufactured from S2 steel, which is correctly hardened and tempered with a satin chrome plated finish. Supplied complete in a two tone 1/4 drawer EVA insert tray made from closed cell foam. Suitable to be used in Draper and Draper Expert tool chests and other manufacturers similar tool chests.
Contents:
30mm long Hex 4, 5, 6, 7, 8, 10, 12mm
75mm long Hex 4, 5, 6, 7, 8, 10, 12mm
30mm long XZN Bits 5, 6, 8, 10, 12
75mm long XZN Bits 5, 6, 8, 10, 12
30mm long Draper TX-STAR®® T20, T25, T30, T40, T45, T50, T55
75mm long Draper TX-STAR®® T20, T25, T30, T40, T45, T50, T55
10mm hex Bit holders 3/8" and 1/2" Sq. Drive
Combination Spanner Set (12 Piece) IT-EVA38 63521
Expert Quality, Draper Expert HI-TORQ spanners manufactured from chrome vanadium steel which is correctly hardened, tempered and then fully polished. Supplied complete in a two tone 1/2 drawer EVA insert tray made from closed cell foam. Suitable to be used in Draper and Draper Expert tool chests and other manufacturers similar tool chests.
Contents:
Combination Spanners 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm
1/4" Socket Set (32 Piece) IT-EVA45 63532
Expert Quality, sockets are manufactured from chrome vanadium steel, which is correctly hardened and tempered with a micro satin chrome plated finish. Each socket has a knurled ring for extra grip. Supplied with 72 tooth reversible soft grip ratchet and accessories. Supplied complete in a two tone 1/4 drawer EVA insert tray made from closed cell foam. Suitable to be used in Draper and Draper Expert tool chests and other manufacturers similar tool chests.
Contents:
Sockets 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm
Deep sockets 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm
72 tooth reversible ratchet with soft grip and quick release button
Spinner handle
Sliding T bar 105mm
Universal joint
Extension bars 50, 100, 150mm
3/8" Socket Set (35 Piece) IT-EVA46 63534
Expert Quality, sockets are manufactured from chrome vanadium steel, which is correctly hardened and tempered with a micro satin chrome plated finish. Each socket has a knurled ring for extra grip. Supplied with 72 tooth reversible soft grip ratchet and accessories. Supplied complete in a two tone 1/2 drawer EVA insert tray made from closed cell foam. Suitable to be used in Draper and Draper Expert tool chests and other manufacturers similar tool chests.
Contents:
Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mm
Deep sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21mm
Spark plug sockets 10, 12, 14mm
72 tooth reversible ratchet with soft grip and quick release button
Extension bars 75, 125mm
Universal joint
Tool Kit in Full (36 Piece) IT-EVA51 63547
A wide selection of tools. Supplied complete in a two tone full plus drawer EVA insert tray made from closed cell foam. Suitable to be used in Draper and Draper Expert tool chests and other manufacturers similar tool chests.
Contents:
225mm straight jaw self grip pliers
200mm adjustable wrench
18mm retractable segment knife
10 x snap off spare blades
5M measuring tape
300mm steel rule
Magnetic pick up tool
Scriber
8 x Hex keys 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 5.5, 6.0mm
Auto centre punch
5 x punches cold chisel 12 x 9.5 x 130mm, cap chisel 5 x 9.5 x 130mm, pin punch 4 x 9.5 x 150mm, centre punch 4 x 9.5 x 120mm, tape punch 3 x 9.5 x 120mm,
Half round file
2 x needle files
8" crimping tool
300mm hacksaw
2 x 9" stainless steel and brass wire brush
Slimline COB LED Rechargable Magneting Inspection Lamp (5W) RIL/SL450/B 65395
5W inspection lamp fitted with an additional SMD LED’s on the end transforming the lamp into torch. The 3 cycle switch allows half/full/torch features. Powered by a rechargeable Li-ion battery providing an impressive 450 lumens inspection light and a 250 lumen torch. The base is manufactured with an integrated magnet with protective cover and pivoting head enabling the light to be used in any 360° position. Supplied with micro USB to standard USB cable and 3 pin approved USB charger.
About Draper
The history of Draper Tools starts in 1919, when Bert Draper ran a business of trading government surplus and tools in Kingston Upon Thames. The company was known initially as B. Draper & Son Limited, and operated as a wholesaler for brands such as King Dick, as well as its own B.D.S. brand.
The company moved to the Chandler's Ford site in 1963, under the management of Bert's son, Norman Draper. The company formed international partnerships with manufacturers such as Germany's Elora and Knipex.
Draper tools are a well established tool brand offering outstanding quality at the price, aimed at the professional and DIY markets
| Key Features | Storage Box Included, Electricians Kit, 188 Piece Set | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||
| Manufacturer | Draper Tools | ||||||||||||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA