Testo 606-2 Moisture Temperature Humidity Meter 0560 6062
- Hold Function
- Measures Air Temperature
- Measures Relative Humidity
- Moisture % Measurement
- Suitable for Multiple Materials
- LCD Display
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Testo 606-2 Moisture Meter 0560 6062
Overview:
The testo 606-2 measures the moisture content of a variety of different types of wood and building materials. Apart from being able to measure moisture in the same way as the testo 606-1 moisture meter, the testo 606-2 is also able to measure relative humidity and air temperature and calculate the dew point and wet bulb temperature.
This means that you are now not only able to measure the moisture content of the wood you have stored but also the relative humidity in the surrounding storage area. Armed with such valuable information, you can now easily determine whether the storage conditions are ideal or whether they need to be adjusted.
Testo 606-2 Comes Supplied With:
- Testo 606-2 moisture meter
- Protective cap
- Belt bag
- Calibration protocol
- Batteries
Characteristic curves for precise moisture measurements in wood and building materials
The testo 660-2 measures the moisture content of wood and building materials via the two ram electrodes which are pushed firmly into the material. The characteristic curves of the different materials allow the moisture content to be displayed directly as a weight percentage based on the dry mass (dry weight). The following characteristic curves are stored in the testo 606-2 moisture meter:
- For precise moisture measurements in beech, spruce, larch, oak, pine, maple
- For detecting moisture and wet places in building materials like cement screed, concrete, plaster, anhydrite screed, cement mortar, limestone mortar and brickwork
The testo 606-2 moisture meter - compact, practical, professional, easy to use
The compact testo 606-2 moisture meter is designed to make work more efficient and life a lot easier. A variety of practical functions and features including a hold function which freezes the last reading, a backlit display for use in all lighting conditions, a slip-on protective cap and a belt bag which ensure that your moisture meter is stored safely and a hand strap that helps prevent your meter from being accidentally dropped all ensure that you are best equipped to carry out professional and reliable measurements.
The testo 606-2 comes complete with a wide range of characteristic curves for wood and building materials. This allows the measured the moisture content to be shown directly as a weight percentage.
Characteristic curves for precise wood moisture measurements:
- Beech
- Spruce
- Larch
- Oak
- Pine
- Maple
Characteristic curves for precise building material measurements:
- Cement screed
- Concrete
- Plaster
- Anhydrite screed
- Cement mortar
- Limestone mortar
- Brickwork
See alsoTesto 606-1
Details as the Testo 606-2 without the humidity and air temperature sensors for thos requiring just basic moisture testing.
ISSWWW and Testo
Testo Limited was established in 1983 as the UK subsidiary of testo and is based in Alton, Hampshire where they supply a full range of test equipment across the UK and Ireland. They are a key supplier to the Facility Management and Industrial Maintenance Sectors where they are able to provide the full range of instruments which are critical to the effective and efficient maintenance of premises, and allow compliance with all key regulations.
Testo have many innovative products to their portfolio with a modern attractive design. Aesthetic appeal isn't something usually attributed to test equipment but Testo really breaks the mould. Coupled with their pedigree as a worldwide manufacturer and supplier with a proven track record, we are confident in supplying and recommending Testo products without reservation.
| Key Features | Hold Function, Measures Air Temperature, Measures Relative Humidity, Moisture % Measurement, Suitable for Multiple Materials, LCD Display | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | Testo | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Short Description |
Updated January 2024
Please note, our cut-off time is 2:00pmOrders requiring calibrationWhilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery. Bank/Public HolidaysPredicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order. *UK Mainland (Revised March 2021)
Delivery SurchargesBecause of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
Offshore ServicesAll offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles. International deliveryInternational delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk ExportAll export inquiries should be directed to the export division before placement of order. If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
