The images provided are for illustrative purposes only. Please refer to product description.

ACT 612 6V 12V Battery Tester

Take seconds to receive accurate Ampere hour (Ah) capacity results of the most common 6V and 12V lead acid battery types. The ACT 612 simulates a 20 hour (C20) discharge test in seconds!

0 Review(s) Add Your Review

Next Day Delivery (subject to availability)

£199.95 exc. VAT £239.94 inc. VAT £262.80 inc. VAT

Discharge Testing
Manufacturer Certificate Included
Intelligent Battery Tester
6V & 12V Battery Models
Simple Operation

Add Certificate Of Calibration?

Required Fields

Qty:

Confirm Availability
Calibration Info

Information on calibration of newly purchased equipment and what it means to you.

Calibration and it's certification comes in varying forms on new equipment and in this section we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as a end of line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your companies name on and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within it's intended application, it has no traceable certificate or constitute any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

FREE personalised traceable calibration certificate

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your companies details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a FREE personalised traceable calibration certificate. This equipment is supplied by the manufacturer with a basic statement of conformity. We have upgraded the equipment to include a full personalised traceable calibration certificate for you in our laboratory at our expense.
You are advised to renew your calibration annually.

Where offered this can be identified by the logo below:
Call Me Back
Seen it cheaper? Click Here

Description
Features & Specification
Resources
Delivery

ACT 612 6V/12V Battery Tester

The ACT 612 is a dual voltage intelligent battery tester, designed for 6V and 12V lead acid batteries from 1.2Ah to 100Ah, making it capable of testing 12V batteries up to 150Ah. It`s the only product of its kind to have an Ampere-hour (Ah) calibration control, enabling Ah readings to be adjusted to suit various battery technologies including standby SLA (AGM), cyclic GEL and car FLOODED (WET) batteries.

The ACT 612 Comes Suppled With:

ACT 612TL Test Leads
ACT 430N Soft Carry Case
Sample ACT BTL Labels
Operating Instructions
Certificate of Calibration

Test SLA, GEL & FLOODED
Simply turn the Ah Calibration Control to select either standby SLA, cyclic GEL and car FLOODED battery types prior to testing. The Calibration Control also allows you to calibrate the battery tester to non standard battery types.

For 6V & 12V battery models
Test 6V battery models between 1.2Ah and 12Ah, and 12V battery models between 1.2Ah and 100Ah. With a wide Ah range, the ACT 612 is ideal for testing batteries used in many applications from security, mobility to leisure.

Simple Operation
Connect the clamps to the battery, turn the Ah Calibration Control to the desired battery type under test and press the ‘TEST’ button. It’s that easy. Results will be displayed within seconds.

DC Voltage and Ah Capacity Results
There’s no confusing conversion rates or user interpretation needed when using the ACT 612 . Two results are displayed – the battery’s DC voltage followed by the actual Ah capacity available.

When to Recharge or Replace
Battery manufacturers recommend to recharge or replace a battery when its rated Ah capacity falls below 65%. By giving a clear and accurate Ah reading, the ACT 612 will help you identify replacements quickly and easily.

Advanced Pulse Load Technology
The ACT 612 uses advanced pulse load technology to analyse Ah capacity, based on the battery’s temperature and state of charge. This method is significantly more accurate than measuring voltage and internal resistance and does not deplete the battery unlike a conventional load tester.

Reliable, Continuous Testing
Powered by the battery under test and with ultra low heat generation.

Portable
Perfectly suited as a bench tester or out with the engineer.

Economical
Identify batteries that still have life remaining and reduce the amount discarded unnecessarily.

Profitable
Show the customer the result and increase your own battery sales by recommending a new battery for their system.

ACT 612 6V/12V Battery Tester
Specification	Details
Operating Voltage	6V and 12V DC
Reverse Polarity Protection	Red LED Indication
Max Input Voltage	15VDC
Over Voltage Protection	Max 30VDC (10 sec.) with Red LED Indication
Battery Types	SLA (AGM), GEL & Flooded (WET)
Battery Sizes	6V (1.2Ah to 10Ah) and 12V (1.2Ah to 100Ah)
AH Capacity Test	Simulated 20 hour (C20) load test to 10.50VDC
AH Calibration	Calibrated at 0 (zero) position to brand new fully charged premium brand SLA batteries rated at C20 hour at 20°C (68°F)
AH Result	Based on the battery under test temperature and state of charge
Adjustment Provides	± Ah adjustment to brand new fully charged standby SLA, cyclic GEL and car FLOODED lead acid batteries
Battery Table	Recharge or replace battery when Ah capacity available falls below 65% of the battery's stated capacity
Display Type	Blue Back-lit LCD
Flat Battery Warning	6V <5.30VDC, 12V <10.50VDC
Repeat Test Operation	Can perform repeat tests continuously
DCV Accuracy	±2% of displayed reading
AH Accuracy	±5% Fully charged premium brand C20 hour rated SLA batteries at 20 - 25°C (68 - 77°F)
Applied Pulsed Load	6A 1.2Ah - 7Ah, 18A 8Ah - 100Ah
AH Calibration_ Adjustment	Approx. ±25 dgts
Case Construction	High impact ABS with holster
Dimensions	84(H) x 170(W) x 41(D)mm (including holster)
Warranty	12 months
IN THE BOX	ACT 612 Intelligent Battery Tester, ACT 612TL Test Leads, ACT 430N Soft Carry Case, Sample ACT BTL Labels, Operating Instructions and Certificate of Calibration

Click here to download datasheet

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring
calibration may on occasion miss dispatch that day, according to the complexity of the calibration. Be assured they will ship on the next dispatch
this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Temporarily revised June 2020)

Please note that regrettably, we have had to realign our delivery service options to those available from our carriers.
During the current situation surrounding the effects of the Coronavirus pandemic, logistics from every company are under immense pressure to deliver goods on time.
We have taken the decision to temporarily limit our services rather than let our customers down.
We hope you will understand our position on this and we apologise unreservedly for the inconvenience we know this will cause.
We look forward to restoring our full delivery service schedule just as soon as we are able.

Standard FREE 1-2 Day Courier Delivery – UK Mainland only - Zones A & B

Included in the price for all orders over £75.00 (exc vat). Sent using express courier, delivered within 1-2 working days from the date of your order, subject to availability.

Next Day Anytime Delivery (Excluding Saturday & Sunday) – UK Mainland only - Zones A & B
Sent by express courier, delivered next day (excluding weekends) from the date of your order, subject to availability.

Orders must be placed before 3:00pm for a qualifying next day delivery and a telephone number supplied, subject to availability.

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we need to apply a surcharge on all deliveries made in the following regions bringing the carriage charges to:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 2 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International Delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to purchase your items.
All stated prices are subject to VAT at the current rate where applicable E&OA