Like most organisations we use cookies on our site, these allow us to improve your experience on our site, provides us with measurement and analytical data, and allows us to make use of the latest digital marketing capabilities - if you want to know more about cookies and how you can control them see our cookie policy here, if you are happy for us to use cookies then please click the button opposite.

Megger MFT1741+ plus EVCA210-UK EV TEST KIT 1

NEW Megger's flagship MFT1741+ MFT complete with the EVCA210-UK charge point adapter, bringing you a comprehensive EV solution that's ready to use.

Important Calibration Information

This instrument comes with a manufacturers calibration certificate.
Please see 'Calibration Options' in the description for more details.

Next Day Delivery (subject to availability)

£1,195.00 exc. VAT £1,434.00 inc. VAT £2,382.00 inc. VAT
  • 10 mA to 1 A single and 3 phase RCD testing
  • Earth testing and stake-less testing
  • EN61010 CAT IV safety rating and tough IP54 case
  • Enhanced non-trip loop impedance measurement
  • Fully 18th Edition Compliant
  • Internal memory and Bluetooth® communications
  • Simple colour-coded test selection
  • Vehicle Charge Point Testing
  • Manufacturer Certificate Included
  • FreeDelivery
  • 30DayMoneyBack
Required Fields
  • Description
  • Features & Specification
  • Resources
  • Delivery

FREE Gifts

This instrument comes complete with your choice of free gift from the drop-down menu above. Choose from a calibration voucher for next 
year, a 50m R2 wander lead or a set of quality silicone test leads. How about any one of the IET Guidance Notes, or a quality two-pole tester? 
Whatever you choose you can be sure you're getting a fantastic deal at Instrument Sales & Services.


Megger MFT1741+ Multifunction Tester and EVCA210-UK Adapter

The Megger EV Test Kit 1 gives you Megger's flagship MFT1741+ Multifunction tester and the EVCA210-UK charge point adapter.

*If you are looking to purchase the EVCA210-UK adapter separately, please see our listing here.

*PLEASE NOTE: The adapter is currently out of stock pending a delayed shipment from Megger, ETA 'December' with no firm date at this point.
                             You are welcome to order the kit deal but please be aware that the adapter will follow later.


Particularly effective in areas that suffer from high electrical noise, the Megger MFT1741+ provides all the tests needed to complete the necessary electrical certifications for industrial, commercial and domestic fixed wiring installations.

Save time and get non-trip loop testing down to 8 seconds with the MFT1741+’s new Loop Impedance testing technology! This innovative ability also increases the accuracy of results as it prevents the RCD from influencing the total loop impedance value. What’s more, you can measure the degree of confidence in the accuracy of the measured loop impedance, thanks to Megger’s new Confidence Meter measurement analysis (patent pending). This technology uses the digital ARC to indicate the analytical process, then continually monitors and adjusts the measurement when circuit noise is present, resulting in a dramatically improved and repeatable test result.

You can even test electric vehicle charge points with the MFT1741+! It comes with an automatic EV Charge Point RCD test sequence, including the 6 mA DC test*.

Easy-to-use and quick to learn, this instrument has no hidden menus or complicated screens but instead has colour-coded function controls that make range selection simple and speedy. Additionally, it can be operated ambidextrously with dual TEST and LOCK buttons at both sides.

The MFT1741+ is designed for tough environments, with IP54 protection against dust and water and an EN61010 CATIV safety rating. Indeed, the MFT can withstand accidental misuse and voltage transients, keeping you safe on the job.

Megger MFT1741+ Comes Supplied With:

  • Printed quick start guide
  • Full user guide on CD
  • Calibration certificate
  • Switched probe SP5
  • Neck strap - Megger embroidered
  • 3 Wire lead set with prods and clips
  • Mains plug test lead (BS1363)
  • AC battery charger
  • Large soft pouch with extra storage

*Important Calibration Information:

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

General Features:

Quick to pick up and use, the function controls are colour coded to make range selection easy and fast. They also reduce the chance of using the wrong function or range. The large crystal clear backlit display uses the Megger digital/analogue arc, providing indication of fluctuating readings while the dual digital readout shows precise values of key measurements simultaneously with the test parameters, such as the output voltage on insulation testing as well as the resistance value in MΩ.

Visible and audible safety warnings are paramount when testing high energy systems and the MFT1741+ includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited and a warning beep sounds. The MFT1741+ features internally rechargeable batteries and charger with a charge time of less than 4 hrs, so reducing the cost of ownership. The new MFT1741+ has been designed for tough environments and ultimate reliability.

Features include a rubber over mould for extra protection and grip, IP54 protection against dust and water and an EN61010 CAT IV safety rating. Its class leading input protection ensures the MFT can withstand accidental misuse and voltage transients when other testers can’t. All this in an intuitive and easy to use instrument with no hidden menus or complicated screens. Included with the instrument: standard 3-wire lead-set and a mains test lead, a switched probe for fast and easy testing, a full 12-month calibration certificate and warranty upgradeable to 3 years warranty, free of charge. The MFT1741+ is supplied in a large soft pouch with plenty of additional space for optional extras like a few tools and the earth electrode test kit, comprising 2 spikes and 3 long test leads

Applications:

The MFT1741+ offers a wide range of test functions, designed for all electrical installation testing and verification of low voltage building wiring and distribution testing scenarios. The MFT1741+ is IEC 61010 CAT IV 300 V rated for safe connection anywhere within the LV network on single and 3 phase systems. The unique modern styling allows it to be operated while stood on the floor, whilst up a ladder or platform, and optimised for hanging around the user’s neck. Dual TEST and LOCK buttons - one pair at each end - makes the testers easy to operate left or right handed.

New electric vehicle charge point testing

The MFT1741+ includes an automatic EV Charge Point RCD test sequence, including the 6 mA dc test*. 
Test results can be reviewed or saved to memory and reviewed later.
This kit comes complete with the EVCA210-UK adapter giving you full EV point testing right out of the box.


Key Features:

  • Testing of Electric Vehicle Charge Points*
  • Enhanced non-trip loop impedance measurement technology
  • “Confidence meter” measurement analysis (patent pending)
  • Full single and 3 phase compliant installation testing
  • 10 mA to 1 A single and 3 phase RCD testing
  • Earth testing and stake-less testing for electrode resistance measurement*
  • Simple colour-coded test selection
  • Ambidextrous operation
  • Internal memory and Bluetooth® communications
  • EN61010 CAT IV safety rating and tough IP54 case


The MFT1741+ multifunction tester is an instrument designed for testing low voltage electrical installations and especially in locations that suffer from high electrical noise. It provides all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations, and includes:

  • TRMS System voltage and frequency measurement 
  • Insulation test at 100 V, 250 V, 500 V and 1000 V Including input protection against live circuits up to 600 V even when insulation test is locked-on
  • Continuity resistance at 200 mA or 15 mA 
  • Automatic start - no need to press TEST so leaving both hands free to hold probes 
  • Resistance range up to 100 kΩ with fast continuity buzzer at selectable thresholds 
  • Earth loop impedance testing, with: 
    New 3 wire non-trip technology
    New confidence meter measurement 
    2 and 3 wire non-trip range
    2 wire Hi current including phase to phase
    Prospective fault current measurement up to 20 kA
  • RCD testing including: 
    Type ac, A, S, B and programmable RCDs
    Testing of Electric Vehicle Charge Points RCD’s* 
    3-phase RCDs
    Auto-test routine
    EV Charge Point RCD Testing
  • Earth spike testing
    2-pole/3-pole*, ART* and Stake-less* techniques

* With appropriate optional accessories


New Loop Impedance testing technology:

The MFT1741+ includes a new non-trip loop testing technology that:

  • Prevents any influence the RCD may present to the total loop impedance value.
  • Faster non-trip loop testing down to 8 seconds.

This technique also allows testing of loop impedance through 10mA type ac and Type A RCDs.

New “Confidence meter*” measurement analysis (Patent pending)

Overlaying the new non-trip loop impedance measurement is the new Megger “Confidence meter”. As loop impedance values can be dramatically affected by circuit noise, the Confidence Meter displays the degree of confidence in the accuracy of the measured loop impedance. Using the digital ARC to indicate the analytical process, the measurement is continually monitored and adjusted when circuit noise is present, resulting in a dramatically improved and repeatable test result.

Spares & Accessories (Not Supplied):

  • Fused 10 A test lead set (red/blue/green) with prods and clips 1001-975
  • XTL30 Extension Test Lead 30 m 2007-998
  • XTL50 Extension Test Lead 50 m 2207-997
  • Cigar lighter adapter for battery charging 6280-332
  • Switched Probe SP5 (silicone) 1001-687
  • MCC1010 Current measuring clamp 1010-516
  • MVC1010 Voltage inducing clamp, calibration 1010-518
    check pcb (for stakeless test) and lead
  • Electrode kit 1001-810
  • Test and carry pouch 1006-408
  • 3 Pole Earth Test Kit 6210-160
  • ETK30 (3 Pole Earth Test Kit) 1010-176

Megger EVCA210 Electric Vehicle Charge point Adaptor

The Megger EVCA210 is a compact, simple to use adapter designed to perform all the functions required by the electrical contractor to fully test Mode 3 AC Electric Vehicle Charge-points.

The Megger EVCA210/EVCA210-UK are compact, simple to use adapters designed to perform all the functions required by the electrical contractor to fully test Mode 3 AC Electric Vehicle Charge-points. Specially designed to comply with UK, European and other International wiring regulations and standards, the EVCA210/EVCA210-UK may be used on all single and three phase electric vehicle charge points, with appropriate connectors. They are designed to test the function and safety of a charging point. The adapters allow you to conduct tests using appropriate single or multifunction test instruments on EV charging points in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722. Charging points should be tested as part of the initial installation and repeated periodically.
The Megger EVCA210/EVCA210-UK test adaptors are designed to simulate the connection of an electrical vehicle to the charging point under test. Connection of the adapter enables the operator to trigger the charging process by selecting the appropriate Proximity Pilot (PP) and Control Pilot (CP) states.
Test instruments can be connected using either the front mounted mains socket or the 4mm connection ports L1, L2, L3, N, PE. 2 additional CP signal terminals give the operator the ability to measure the CP signal using an oscilloscope. In addition, the adapters have a manual PE Pre-Test feature that allows the user to test for dangerous voltages present on the PE, prior to any other testing of the charge point. If this test fails, testing must cease as potentially dangerous voltages may be present on the PE and faults must be investigated and rectified before continuing. The adapters also integrate two further manual tests: CP Error – simulates an error on the control pilot circuit; and a PE Error – where a disconnection of the PE circuit is produced. Both test ensure correct disconnection of the output of the charge point.Before carrying out testing with this adaptor, it is recommended that the user familiarize themselves with the relevant standards: IEC 61851-1:2017, Electric vehicle conductive charging system - Part 1: General requirements
IEC 60364-7-722:2018 Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles and any documentation relating to the charging station itself.The Megger EVCA210-UK is provided with 2 connection cables as standard, a Type 2 connector for charging points with panel mounted socket outlet or fixed cable with vehicle connector and a Type 1 connector for charging points with fixed Type 1 cable connector – as found on the Mitsubishi PHEV.The Megger EVCA210 is supplied with the Type 2 plug only.


EVCA210-UK Comes Supplied With:

  • Type 1 Charging Plug
  • Type 2 Charging Plug
  • EVCA210 Carry Case
  • Instruction Manual

Key Features:

  • Push Button for PE Pre-Test
  • Push button for CP Error “E” simulation
  • Push button for PE Error (Earth Fault) simulation
  • Rotary switch providing PP State simulation
  • Rotary Switch providing CP State simulation
  • Type 2 Charging Plug for charging points with panel mounted socket outlet or fixed cable with vehicle connector
  • Type 1 Charging Plug for charging points with fixed cable and vehicle connector
  • (Example Mitsubishi PHEV) – option for the EVCA210/standard on the EVCA210-UK
  • IP54 Rating„Carrying Case
  • CAT II 300V Rating
  • Comply with Low Voltage Directive LVD 2014/35

EVCA210 EVCA210-UK
Input voltage 250 V (single phase system) / 430 V (three phase system) Y Y
Rotary switch providing PP State simulation Y Y
Rotary Switch providing CP State simulation Y Y
Push button for CP Error “E” simulation Y Y
Push button for PE Error (Earth Fault) simulation Y Y
Measurements on live conductors (L1, L2, L3 and N) and on PE conductor Y Y
Mains Socket: EVCA210-UK - 13A UK socket EVCA210 - Schuko socket (CEE 7/3) Y Y
CP signal test, two 4 mm ports for connection to an oscilloscope Y Y
CAT II 300 V Y Y
IP Rating IP54 Y Y
Type 2 Plug for charging points with panel mount-ed socket outlet or fixed cable with vehicle connector. Y Y
Type 1 Plug for charging points with fixed cable and vehicle connector – Supplied with EVCA210-UK as standard
*EVCA-210 (non UK Version) comes with only a type 2 charging plug.
Y
Soft Carry Case Y Y



Optional accessories for EVCA210 & EVCA210-UK (Included):

  • Soft Carry Case 1013-318
  • Type 1 Charging Plug 1013-319
  • Type 2 Charging Plug 1013-320

ISSWWW and Megger

The extensive Megger product portfolio provides electrical test equipment for an exceptionally wide range of applications at any point of the electricity network. From small handheld low voltage equipment such as multifunction installation testers through to high voltage asset test equipment like insulation resistance testers, circuit breaker analysers, protection relay test systems to transformer condition measurement devices.

Megger designs and manufactures portable electrical test equipment in factories located in Germany, Sweden, the UK, and USA. Megger products help you install, improve efficiency, reduce cost and extend the life of you or your customers’ electrical assets.

Established in the late 1800s, the company has been designing and making test and measurement instruments that perform electrical measurements for preventative maintenance, troubleshooting and commissioning for decades. Megger products have supported customers all over the world to improve their facilities’ efficiency, reduce costs, extend the life of apparatus and through trending and analysis, anticipate equipment failure and future performance.
Being a brand synonymous with the industry and a cornerstone pioneer of many of today’s everyday items of test equipment, ISSWWW are proud to bring you Megger’s full range of equipment and services, now and into the future.

Megger MFT1741+ Multifunction Tester Technical Specifications

Insulation Test
Output voltage -0% +20% at rated load or less
Voltage display ±3% ±3 digits ±0.5% of rated voltage
Short circuit current 1.5 mA nominal test current
Test current on load 1 mA at min pass values of insulation
Insulation Accuracy 
1000 Volts 10 kΩ ~ 999 MΩ ±3% ±2 digits
500 Volts 10 kΩ ~ 500 MΩ ±3% ±2 digits
>500 MΩ ±10% ±4 digits
250 Volts 10 kΩ ~ 250 MΩ ±3% ±2 digits
>250 MΩ ±10% ±4 digits
100 Volts 10 kΩ ~ 100 MΩ ±3% ±2 digits
>100 MΩ ±10% ±4 digits
Resistance and Continuity 
0.01 Ω ~ 99.9 Ω ±2% ±2 digits
100 Ω ~ 99.9 kΩ ±5% ±2 digits
Open circuit voltage 5 V ±1 V
Test current (user selectable) (0 Ω ~ 2 Ω)
205 mA ±5 mA
15 mA ±5 mA (user selectable)
Loop Test
Live to earth/neutral supply 48 V ~ 280 V (45 Hz ~ 65 Hz)
Live to live supply 48 V ~ 500 V (45 Hz ~ 65 Hz)
L-N/L-L tests ±5% ±5 digits
L-E tests 0.1 Ω ~ 39.9 Ω ±5% ±5 digits ± noise margin
40.0 Ω ~ 1000 Ω ±10% ±5 digits
Display range 0.01 Ω ~ 1000 Ω
Live to earth PFC range 20 kA
Live to live PSCC range 20 kA
Notes

† Reference conditions apply

For test environments see service data

RCD Tests
Supply up to 100 mA 48 V ~ 480 V (45 Hz ~ 65 Hz)
Supply up to 1 A 48 V ~ 280 V
RCD type Type AC, A, S
Type B (pure dc)
No trip test (1/2xI) –10% ~ –0%
Trip test (1xI, 2xI and 5xI)+0% ~ +10%
EV 30 mA ac, 6 mA dc (Mode 1 + 2)
(Mode 1 + 2) Ramp Test
Touch voltage (0 ~ 253 V) +5% +15% ±0.5 V
Trip time ±1% ±1 ms
Trip current ±5%
Step Increments
VAR (variable RCD selection) 10 mA ~ 50 mA 1 mA steps
50 mA ~ 500 mA 5 mA steps
500 mA ~ 1000 mA 10 mA steps
Supply Measurement 
Voltage 10 V ~ 600 V
(15 ~ 400 Hz) True RMS
±3% ± 1 V ±2 digits
Phase rotation indication L1–L2–L3 and L1–L3–L2
Frequency 15 Hz ~ 99 Hz ±0.5% ±1 digit
100 Hz ~ 400 Hz ±2.0% ±2 digits
Frequency resolution 0.1 Hz
Power Supply 
Batteries IEC LR6 type AA alkaline (6 cells - supplied) or 1.2 V NiMH (rechargeable pack of 6 – supplied)
Mains charger for on-board re-charging (4 hours typical) 12 V car charger (cigar lighter lead - optional)
Earth/ Ground Test
Resolution 0.01 Ω
Current 0.45 mA or 4.5 mA
Noise rejection 20 V pk/pk (7 V rms)
Max probe resistances Rp and Rc
100 kΩ @ 50 V
5 kΩ @ 25 V
2 and 3 pole method (0.01 Ω ~ 1.999 kΩ)
±2.0% ±5 digits
ART method (1.00 Ω ~ 1.999 kΩ)
±5.0% ±5 digits*
Stakeless method  (1.00 Ω ~ 199 Ω)
±7.0% ±5 digits*
Current
(via optional clamp meter) ±5.0% ±3 digits.
Range 0.1 mA to 200 A ac
Resolution 0.1 mA
mV Sensor Input 
Including temperature (third party module) ±1.0% ±2 digits
Range 0.0 mV to ±199.9 mV dc
Resolution 0.1 mV
Data storage
Capacity 1000 results
Bluetooth® communication
Safety IEC 61010-1:2010
IEC 61010-30:2010
IEC 61010-031:2008
600 V CAT III / 300 V CAT IV
(Max Phase to Phase 600 V)
IEC 61557:2007 parts 1 to 10
EMC IEC61326 edition 2 location class B
Operating temperature range and humidity -10 °C ~ +55 °C
90% R.H. at +40 °C max
Storage temperature range and humidity -25 °C ~ +70 °C
Maximum altitude 2000 m
Weight (instrument and case) 1 kg (with batteries, excluding case)
Dimensions (instrument and case) 220 mm H x 390 mm W x 285 mm D
IP rating IP54
Calibration temperature +20 °C
Temperature coefficient <0,1% per °C For test environments see service data.

Megger EVCA210 Charge point Adapter Technical Specification
Input Voltage Up to 250 V (single phase system) / up to
430 V (three phase system)
Input Frequency 50/60 Hz
PE Pre-Test Yes - Push button
CP Error “E” Simulation Push button
PP Simulation NC, 13 A, 20 A, 32 A, 63 A
CP States A, B, C, D
CP Error “E” Yes
PE Error (Earth Fault) Yes
Measuring Ports L1, L2, L3, N and PE Max. 250/430 V, CAT II 300 V, max. 10 A
Mains Socket Max. 250 V, CAT II 300 V max. 10 A,
Note: Do not load mains socket
simultaneously with measuring ports!
CP Signal Test Ports Approx. +/-12 V, CAT 0 (under normal
condition)
In case of wrong wiring or error of the
charging station these terminals
Measurement Category CAT II 300 V
Altitude Above Ssea Level. 2000 m max
Weight Approx: 780g
IP-Rating IP54
CE Directive Low Voltage Directive LVD 2014/35/EU
Safety IEC/EN 61010-1:2010
IEC/EN 61010-2-030:2010
Working Temperature Range 0 ... +40 °C
Storage Temperature Range -10 ... +50 °C
Reference Humidity Range 10 ... 60% relative humidity w/o condensation
Working Humidity Range 10 ... 85% relative humidity w/o condensation

Orders requiring calibration 

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring
calibration may on occasion miss dispatch that day, according to the complexity of the calibration. Be assured they will ship on the next dispatch
this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope 
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.


*UK Mainland (Temporarily revised June 2020)

Please note that regrettably, we have had to realign our delivery service options to those available from our carriers.
During the current situation surrounding the effects of the Coronavirus pandemic, logistics from every company are under immense pressure to deliver goods on time.
We have taken the decision to temporarily limit our services rather than let our customers down.
We hope you will understand our position on this and we apologise unreservedly for the inconvenience we know this will cause.
We look forward to restoring our full delivery service schedule just as soon as we are able.

Standard FREE 1-2 Day Courier Delivery – UK Mainland only - Zones A & B

Included in the price for all orders over £75.00 (exc vat). Sent using express courier, delivered within 1-2 working days from the date of your order, subject to availability.

 

Next Day Anytime Delivery (Excluding Saturday & Sunday) – UK Mainland only - Zones A & B
Sent by express courier, delivered next day (excluding weekends) from the date of your order, subject to availability.

 

Orders must be placed before 3:00pm for a qualifying next day delivery and a telephone number supplied, subject to availability.

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we need to apply a surcharge on all deliveries made in the following regions bringing the carriage charges to:

  • Zones A & B  - Mainland delivery rates apply. 
  • Zone C - Scottish Highlands (Charges are calculated at the checkout).
  • Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
  • Zone E - Northern Ireland (Charges are calculated at the checkout).
  • Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 2 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International Delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to purchase your items.
All stated prices are subject to VAT at the current rate where applicable E&OA