Megger TDR2000/3 Telecoms Time Domain Reflectometer 1007-061

Name: Megger TDR2000/3 Telecoms Time Domain Reflectometer 1007-061
Brand: Megger
SKU: MEG1007-061
Price: 3078 GBP
Availability: InStock

£3,078.00 £2,565.00

SKU

MEG1007-061

Megger TDR2000/3 Advanced Dual Channel TDR with clip probes ideally suited to telecoms cabling.

Price Banner

Our Discount Guarantee

Discounts are available on this Megger High Voltage Test Set. Please contact us via phone, e-mail or the web forms below for your industry leading price

Large backlit display
IP54 Rated
AUTO Set Up
Simple Operation
Rechargeable Batteries
Colour Display

Colour display
Large Backlit Display
Rechargeable Batteries

Information on the calibration of newly purchased equipment and what it means to you.

Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

Personalised traceable calibration certificate from isswww

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

Megger TDR2000/3 Advanced Dual Channel TDR 1003-336

The Megger® TDR2000/3 and TDR2010 are state of the art, dual channel, high resolution, compact Time Domain Reflectometers with a colour screen for locating faults on paired metallic cables. Both TDRs have a minimum resolution of 0.1m/0.3ft and a 20km/60kft maximum range depending on the velocity factor selected and the cable type. Five output impedances are available (25, 50, 75, 100, 125 ohms) and an auto impedance matching feature. The velocity factor can be set between 0.2 and 0.99 to meet any cable test requirements.

Megger TDR2000/3 Comes Supplied With:

2 x Miniature Clip Test Lead Set 6231-654
Dual fused test lead set (2 pairs) 1002-136
Download kit 1003-353
Carry case 1003-217
User guide CD 2003-074
AC-DC charger 1003-352

Key features:

Comprehensive dual- Channel Capability with dual aspect display.
AUTO set up for instant use.
Ultra fast pulse for near end fault identification.
Xpert guidance to potential fault.
IP54 rating offers real life working.
Designed for use on all metallic cable pairs.
Backlit graphics colour LCD (800x480)
Adjustable display contrast
Resolution to 0.1 m
AutoFind guide to potential fault location
100 trace on board memory
USB connection to PC allowing upload and download of traces
“TraceXpert” PC software analysis tool
For use on Telecom TNV-3 circuit, or 150V CAT IV power circuits
Power blocking filter built-in
Environmental protection to IP54
Selectable output impedance (25, 50, 75,100 and 125Ω)
2ns pulse for near end fault location
AUTO option selecting gain and pulse for each range
AUTO option matches output impedance to cable
Display distance in metres or feet
Li-ion rechargeable battery (12 hours typical life)

With a best resolution of 0.1m the TDR2000/3 has a 20km maximum range depending on the velocity factor selected and the cable type. Five output impedances are available (25, 50, 75, 100 and 125 ohms) and with an auto impedance matching feature and a velocity factor between 0.2 and 0.99 to meet any cable test requirements.

The TDR20xx series has a large, high resolution, colour, WVGA display with easy set up features. Directional control buttons, together with soft keys, provide intuitive and easy operation for the user. An AUTO selection option ensures that the most effective parameters are selected depending on the range required, aiding rapid diagnosis of the TDR trace. The ability to manually override the auto function allows fine tuning to enable identification of hard to determine faults.

Dual trace and dual cursor capabilities allow full flexibility, giving the operator full control and instant indication of distance between two points. A trace comparison feature also allows close examination between trace conditions. Extra high resolution together with a white-light backlight, user definable tones and colour give the graphical display a vibrance, aiding the user in identifying key events on the trace.

Trace Storage 100 internal trace memories provide for the storage and recall of test results. The traces can be recalled to the display for analysis or compared with an active display to aid in fault location. Alternatively the stored results can be downloaded to a computer, via the USB port, using the TraceXpert software and USB lead provided. Fault identification Megger’s own built-in AutoFind mode allows for speedy identification of faults. One press of the AutoFind key automatically adjusts the range and gain, and positions the cursor to the first major event on the cable. Press the AutoFind key again and the cursor will jump to the next detected disturbance. For those who wish to maintain manual control, manual operation allows full override access to refine the response for easy fault identification.

Trace Tagging The addition of a trace tagging function on the TDR2010 allows the user to maintain accurate records of circuit details against every saved result. This is retrieved into the TraceXpert software for inclusion in the master record and for use on reports. TraceXpert PC software The TDR2000/3 and TDR2010 come complete with the Megger TraceXpert software which gives full control over downloading, reporting and uploading of saved trace results. Designed around a database and programmed for ease of use and simplicity, TraceXpert offers the ideal application for all your data processing requirements.

TDR2000/3 - high resolution TDR with backlit colour display and powered by Li-ion rechargeable battery batteries, complete with 2 pairs of mini-clip test leads.

TDR2000/3P - high resolution TDR with backlit colour display and powered by Li-ion rechargeable battery batteries, complete with 2 pairs of fused test leads.

Features & Specification

More Information
Key Features	Large backlit display, IP54 Rated, AUTO Set Up, Simple Operation, Rechargeable Batteries, Colour Display
Product Stock Status	Next Day Delivery (subject to availability)
Manufacturer	Megger
Short Description	General: Range: Up to 20000m with a minimum resolution of 0.1m Accuracy: ±1% of range ±1 pixel at 0.67 VF Resolution: 1% of range Input Protection: Complies with IEC61010-1 for connection to live systems up to 150 V CAT IV. Fused leads must be used if the voltage between the terminals exceeds 300 V. Output Pulse: Up to 20 volts peak to peak into open circuit. Pulse widths determined by range and cable. Gain: Set for each range with user selectable steps (in Manual operating mode) Velocity Factor: Variable from 0.2 to 0.99 in steps of 0.01 TX Null: Automatic Power Down: User programmable auto power off timer 1, 5, 10 mins or never Battery: Li-ion rechargeable battery Battery Charge Time: 6 hours at 0 °C to 40 °C Battery Life: 12 hours typical Safety: Complies with IEC61010-1 for connection to live systems up to 150 V CAT IV or 300 V CAT III. Fused leads must be used if the voltage between the terminals exceeds 300 V. Compliant with EN60950-1, EN61010-3, UN38.3 and EN62133 EMC: Complies with Electromagnetic Compatibility Specifications (Light industrial) BS EN 61326-1, with a minimum performance of ‘B’ for all immunity tests. Part numbers: 1003-036 (TDR2000/3) / 1003-037 (TDR2000/3P) Mechanical: IP rating: IP54 Case: ABS Dimensions: 290 x 190 x 55 mm (11.4 x 7.5 x 2.2 inches) Weight: 1.7kg (3.8lbs) Connectors: Four 4mm-safety terminals and two F connectors. Other standard push on adapters will fit the TDR2000/3. Test Lead: 2 metres long consisting of 2 x 4mm shrouded connector to miniature crocodile clips (TDR2000/3) or Bed-of-Nails lead set (CFL535G) or .5 metre fused leads (TDR2000/3P) Display: 800 x 480 pixel colour graphics LCD, viewable in external environments. User selectable colour schemes Backlight: Permanent backlight with all colour schemes Environmental: Operating Temperature Range and Humidity: -15 °C to +50 °C (5 °F to 122 °F) Storage Temperature Range and Humidity: -20 °C to 70 °C (-4 °F to 158 °F)

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT	£4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm	£7.75
Saturday ANYTIME Delivery - Order by 2:00pm	£9.95

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA